As time passes, cracks appear on the ceiling, which spoil the aesthetic appearance of the room. If you decide to do repairs, you should pay special attention to the presence of these things and eliminate them, even if you are going to make a suspended or suspended ceiling.


Before removing cracks on the ceiling, it is necessary to remove wallpaper or paint, if present. Now you need to expand all the cracks on the ceiling a little, because you need to create an excellent bonding of the ceiling surface with the solution. Many people do not know how to cover up a crack in the ceiling. You will be surprised, but the list of substances intended for the manufacture of mortar in hardware stores is very diverse, you only need to make a suitable choice. One of the popular traditional methods is to seal the crack with a gypsum mixture and a paste prepared at home, which contains chalk and gypsum. This is the most preferred method, because using these substances it is possible to protect the ceiling from moisture more effectively and achieve a much better result that will last for a long time. In order to achieve perfect sealing, cracks and gaps must be well moistened with water, dried and cleaned.


At the next stage, the sealing of cracks itself begins. The treatment must be carried out taking into account the surface material, depth and location of cracks. If you need to align the recess, seams, cracks formed on concrete floors in rooms where there is high humidity, it is best to use waterproof putties that have high-quality filling properties. If small cracks on a small area are amenable to sealing, it is recommended to use a fine-grained putty resistant to moisture with a quickly drying surface. Using a spatula, it is applied to the ceiling and sanded immediately after drying. The layer of this putty should be at least 4 mm. To achieve success in this work and get a perfectly flat ceiling, it is recommended to thoroughly rinse and remove all dirt and dust that are on the ceiling surface. When filling cracks, there is no need to hurry, it is necessary to apply the paste in several layers. In order to avoid the appearance of cracks after the completion of the work, it is necessary to apply a layer of gauze on a well-moistened putty. When processing large cracks, it is best to perform work with the use of reinforcing mesh. Large gaps are closed with such a grid, and only then they are plastered on top. After the plaster dries, the main layer of putty or dry mix is applied to the ceiling to level the surface. After some time, the ceiling surface can be sanded.


Another method of dealing with large cracks is popularly known when bandages are used, using linen or cotton fabrics. In this case, the fabric strip is glued to the ceiling surface in such a way that the gap between its edge and the crack edge should be 2-3 cm. Using this method of removing cracks from the ceiling, it is necessary to adhere to a certain order, otherwise it will not be possible to avoid compression of the fabric. At first, the fabric is washable and thoroughly ironed, then it is soaked in glue. Then the strip is pressed and the pad is placed on the required place, which is slowly straightened with a spatula. After drying the fabric, putty is applied over its entire area.


Also, sealants and mounting foam are used to seal all kinds of cracks. Sealants with a rubber base are recognized as the best. Watch UK online porn https://mat6tube.com/ Diana Dali, Patty Michova, Alina Henessy, Kira Queen etc.